NOTE: This is a 3D printed product and you will need to assemble this. This product will be ready for delivery in 7 working days after placing an order.

The image is for reference only and the KIT will be printed in White color (you can paint any color of your choice over this PLA)

Eclipson model S is a high performance slope soarer. Aerodynamic efficiency has been the main goal of this project since the conceptual phase. With a theoretical maximum lift to drag ratio of 23 to 1 and minimum sink rate of 0,38 m/s this model is simply the most efficient we have designed so far. As usual the model can be printed with PLA or LW-PLA depending on your preferences or flying skills. In case you wanna enjoy this model in the slope the use of though PLA material with flaps is without a doubt the best option thanks to his better impact resistance, better aerodynamic performances at higher speeds and greater stability under strong wind conditions. Nevertheless by printing the model with LW-PLA flying speeds are slower making the model more adequate for thermal flying or even as a trainer for less experienced pilots.

NOTE: Carbon fiber tubes are not included in the kit.

Specification:
Wingspan: 1800mm
Wing loading: 43g/dm2
Printed weight: 850g (approx)
Take of Weight (3s 2200mah lipo): 1250g approx

Required but not included:
● Avionic Pro 2836 KV1120
● ESC: 30A brushless ESC
● Prop: 10x4.7SF or 10x6E
● Servos: 4-6 nos of Avionic 9gms servos
● Battery: Wolfpack 3s or 4s Lipo battery 
● Transmitter: Avionic RCB6i or Avionic OS-10 2.4Ghz transmitter
● Charger: Wolfpack 2-3 simple charger