Eclipson EGW 80 - 3D Printed Kit
SKU: RZ05804
Current rating is 0.00. Total votes 0.
NOTE: This is a 3D printed product. This product will be ready for delivery in 7 working days after placing an order.
The image is for reference only and the KIT will be printed in White colour (you can paint any colour of your choice over this PLA)
Eclipson EGW-80 also known as the "Graywing" was designed to accomplish 3 main objectives: Cheap, fast and easy to fly.
It is cheaper because you will only need to use 400 grams of normal PLA and the "standard" electronic used in any of our models, about the camera/VTX used is the Eachine TX02, you don´t need a flight controller or anything else to fly FPV this model. It is fast because is a low drag design, thin airfoil, flying wing concept, clean fuselage... everything has been designed to get a fast and agile aircraft. By printing this aircraft with LW-PLA flying speed will be reduced and hand launch is much easier. Despite the swept wing concept we have been very careful with the wing design and any tip stalling or bad behavior have been found at stall speed.
The Kit does not include the FPV version parts.
Specification:
Length: 750mm
Wingspan: 800mm (31in)
Wing loading: 57 g/dm2
Printed weight: 510g
Take of weight (3s 2200 lipo): 800g approx
Required but not included:
● Avionic Pro 2826 KV1900
● ESC: 30A brushless ESC
● Prop: 7x4E Prop
● Servos: 2 nos of Avionic 9gms servos
● Battery: Wolfpack 3s or 4s Lipo battery
● Transmitter: Avionic RCB6i or Avionic OS-10 2.4Ghz transmitter
● Charger: Wolfpack 2-3 simple charger
Flight video