select

kk v5.5 not arming and gyros not responding to tilt or sticks movement

Posted: Monday, August 5, 2013 7:55 PM Quote
i m making a quadcopter using kk v5.5 flight controller. connections are as per directed in manual but still facing difficulties in arming and disarming ..what should i do. esc gets callibrated successfully and motors respond to throtlle but not to other sticks. 
thanks sumit.
Posted: Saturday, August 10, 2013 4:24 PM Quote
Hi Pawan... what set up guide are you following and does the board arm sometimes? Also which part of India are you at?
Posted: Tuesday, August 13, 2013 12:36 PM Quote
setup was fine..i flashed board with v4.7 and those issues are solved. But now one of the motor stops after i increase throttle 50%. what should be the final cross checks before first flight? thanks.
Posted: Tuesday, August 13, 2013 6:11 PM Quote
If one of the motors is cutting off post 50% throttle, in all probability it is an endpoint issue with the esc, re-calibrate that esc-motor set. also if you are facing trouble with arming and disarming it again could be an endpoint adjustment issue. Try increasing the endpoints for the rudder channel to a higher than 100% value, most TX's allow for.
Posted: Monday, February 3, 2014 3:00 PM Quote
i am a biginner in quadcopter...and this is my final year project. can you help me how to configure the kk board v5.5 for quadcopter