Introducing the Wolfpack W6-AC 80W Multipurpose charger. This is a power packed charger which is more than will give any other charger a run for its money. For instance this charger reaches to a Max charge of 8A instead of 6A, that means it can speed up your charge by increasing the charge current.
Max balance current increase to 460mA from 300mA, that means it can speed up your balance charge of your lithium batteries.
It does the regular normal charge, Fast charges, storage charge, discharge and balance charge your 1 cell to 6 cell lipo batteries and NIMH, NIHV, LiON, LiFE, NICD and PB batteries

15 extra unique functions are also provide.
1. There are two languages which you can select  - LANGUAGES: English and Deutsch.
2. CELL METER:The charger can test the voltage of each cell of your batteries.
3. CAPACITY:Check the capacity of the battery.
4. IRThe battery pack measure internal resistance.
5. BALANCER:The charger can balance the voltage of each cell to preserve the performance your batteries.
6. DIGITAL POWER:Using the charger's output as a DC power supply.
7. BRUSH MOTOR:You can easily break-in new bushed electric motor using a variable voltage and running time.
8. FOAM HOT CUTTER:The charger acts as a convenient power supply for a hot wire foam cutter.
9. MOTOR/ESC/SERVO:The charger can output the PPM signal instead of your TX for your MOTOR/ ESC/SERVO.
10. BRUSHLESS MOTOR:The charger can drive an inductance brushless motor.
11. SERVO TEST:The charger can test the servo.
12. THRUST CALCULATOR:You can easily calculate the thrust given by your prop.
13. TEMP.:The charger can measure the external temperature by using a temperature sensor.
14. VOLTAGE METER:The charger can measure the DC voltage of an object.
15. PPM TEST:The charger can test the PPM signal from TX, so that you can check out some problem
between your TX and RX.

Specification:
* Operating voltage range: DC11.0~18.0 Volt
* AC to DC adaptor - DC11.0~18.0V
* Circuit power: Max.charge power 80W DC Input 80W AC Input
* Max.discharge power 10W
* Charge current range: 0.1~8.0A
* Discharge current range: 0.1~2.0A
* Current drain for balancing Li-po: 460mAh/cell
* NiCd/NiMH battery cell count: 1~15 cell
* Li-ion/Polymer cell count: 1~6 series
* Pb battery voltage: 2V~20V
* Weight: 590g Net Weight
* Dimensions: 135X145X43mm

This product has a warranty on any manufacturing defect for 6 months from the date of purchase. If the charger is misused or tampering of components of attempt to open  / dismantle the charger then the warranty is void and will not be applicable. You will need to produce the purchase invoice of this product to claim your warranty.

For manual click HERE

How to operate and review video by Adarsh