Ronin is a 2.5 meters glider made for the the FPV flyers. With a large bulkhead this model is born to take the extra payload of your FPV equipment. Some unique features are the twin wheel undercarriage for stable landings (wings don't touch the ground during take-offs and landings), flaps with pre-installed servos for the graceful landings. The Ronin boasts of a large chord length for stability and thermal gliding, however with the powerful 35 series - 1400 KV motors you can cut a strong gale with ease. 
This model comes with a large hole at the bottom of the nose to fit your FPV camera (facing the ground) or you can remove the dummy pilot / canopy and fit the camera (facing nose). The nose can easily take 3 cell 5000mah lipo but see to it that you maintain the CG at 90mm from the leading edge of the wing.

Ronin is short is a great platform for your FPV needs and this (Plug And Play)PNP version comes with motor, prop, esc, servos for ailerons, flaps, elevator and rudder (we will also send you in a extra vertical and horizontal stabilizer for a conventional T-Tail configurations)

Specification:
● Wing span : 2600mm(102.4in)
● Length : 1 500 mm(59in)
● Weight : 2 100 g(74 oz.)
● Total surface area: approx. 66 dm2
● Total surface area loading: approx. 31.9g / dm2

Required but not included:
● 11.1V 5000mah 20C (3 cell)
● Charger for 11.1V lipo
● Avionic RCB7x or Avionic RCB6i 2.4Ghz transmitter
● Servo: 6 nos - 17gms (2.5kg/cm,0.18s/60)
● Motor : D3542-KV1200 Powerful Out-runner Brushless Motor
● ESC : 50A Brushless ESC

Click HERE for manual

Flight Video (courtesy Parambir Singh)