NOTE: This is a 3D printed product and you will need to assemble this. This product will be ready for delivery in 7 working days after placing an order.

The image is for reference only and the KIT will be printed in White colour (you can paint any colour of your choice over this PLA)


EWW-180 also known as the Whitewing is the evolution of The Blackwing. This model is powered by a propeller that will give you a greater efficiency making this version ideal for long autonomous travels or long range FPV flight. Nevertheless you can also get the EDF version. Both versions can be interchanged because the wing is detachable thanks to an innovative and totally 3d printed locking mechanism patented by Eclipson Airplanes, the system is as simple as effective and the airflow will ensure that the latch is closed during the flight. The aerodynamic has been improved mainly thanks to the use of a nonlinear wing torsion, a higher aspect ratio and a lower static margin that was possible due to the use of winglets, this airplane reaches the impressive glide ratio of 19 to 1 at 40 km/h (PLA version). This means that the aircraft can not be used only like UAV/FPV model but also like a motor glider. 

NOTE: Carbon fiber tubes are not included in the kit.


Specification:
Wingspan: 1750mm
Wing loading: 40 g/dm2
Printed weight: 650g  (approx)
Take of Weight (2qty 3s 2200mah lipo): 1100g approx

Required but not included:
● Avionic Pro 2826 KV1900
● ESC: 30A brushless ESC
● Prop: 7x6E or 8x6E
● Servos: 4 nos of Avionic 9gms servos
● Battery: Wolfpack 3s or 4s Lipo battery (require 2qty battery to balance CG)
● Transmitter: Avionic RCB6i or Avionic OS-10 2.4Ghz transmitter
● Charger: Wolfpack 2-3 simple charger